Wilco Feelthere A320

juanvm · #1 11th February 2010, 22:41

Hello

I had set most of my FS9 aircraft's using FSUIPC with the Saitek Pro Yoke, pedals and quadrant, but when I calibrate the throttles for the Wilco Feelthere airbus A320, for example, the auto pilot throttle control does not work (will funtion manually but not Auto throttle). Someone had been able to program with this aircrafts without probles?????????????

Thanks

TC-BUG · #2 27th March 2010, 14:40

I recently switched from X52 to the Saitek Throttle Quadrant.Before in X52 everything worked perfect with Wilco Airbus Volume 1 , I could reduce the throttle and the detents would move to CLB mode no problem.

Now in Saitek TQ I have programmed all the throttles and axis' from FSUIPC , nothing was done in FS assignments section, the problem is, the TQ won't work with Airbus. Even though I move them back to the CLB detent, the plane will stay in full thrust and go overspeed. There's no way to fly it with Auto Thrust mode. The only thing to avoid overspeed is to disable AT which is not realistic at all. I noticed before going into any detents,the airbus has a full manual thrust space, and say I move them to 50%,but the thrust I get is 70% where it should have been 50. I am thinking this is causing the issue. And I couldn't come up with the solution to it, so now I cannot use Airbus in FS.

Please please please if you know how to fix this, please share. Thank you !

ps. I have been talking to my friends who own the TQ and they have the same problem, so the solution to this will make many people happy.
Let me just make it easy by saying that thrust will just go to full even in FLX takeoff, just will go full power and not come back with CLB detent or anything unless AT disconnect. And I tried the registry deleting thing that UKSupport advises but it didn't work.

juanvm · #3 27th March 2010, 17:40

Hello

Following is the complete fsuipc config file, the wilco airbus is the last section, I'm showing all the config file because your hardware setting might not be the same as mine. Pete from FSuipc helped me in calibrating the throttle for the Wilco airbus.

************************************************
[JoyNames]
AutoAssignLetters=Yes
1=Saitek Pro Flight Yoke
2=Saitek Pro Flight Rudder Pedals
A=Saitek Pro Flight Throttle Quadrant
B=Saitek Pro Flight Yoke
C=Saitek Pro Flight Rudder Pedals
0=Saitek Pro Flight Throttle Quadrant

[General]
UpdatedByVersion=3971
WindSmoothing=Yes
AutoTaxiWind=No
PropTaxiWind=No
TimeSetMode=Partial
WhiteMessages=No
ThrottleSyncAll=Yes
GraduatedVisibility=No
LowerVisAltitude=0
UpperVisAltitude=25000
UpperVisibility=6000
GenerateCirrus=Yes
WindShearSharp=No
UpperWindGusts=No
ExtendMetarMaxVis=Yes
CorrectVSsign=Yes
MouseWheelTrim=No
MouseWheelTrimSpeed=1
AxisInterceptIfDirect=No
DisconnTrimForAP=No
ZeroElevForAPAlt=No
AutoClearWeather=Yes
ExtendTopWind=Yes
WindSmoothness=5
SmoothPressure=No
PressureSmoothness=5
SmoothVisibility=Yes
VisibilitySmoothness=2
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
MinimumVisibility=0
MaximumVisibilityFewClouds=0
MaximumVisibility=0
MaximumVisibilityOvercast=0
MaximumVisibilityRainy=0
OneCloudLayer=No
ThinClouds=No
ThinThunderClouds=No
CloudThinness=1000
ThunderCloudThinness=10000
CloudTurbulence=No
CloudIcing=No
WindTurbulence=No
SuppressAllGusts=No
ExternalOptionControl=Yes
AutoTuneADF=No
KeepFS98CloudCover=No
ShowPMcontrols=No
MagicBattery=Yes
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
StopAutoFuel=No
TrapUserInterrupt=Yes
NavFreq50KHz=No
ClockSync=Yes
SmoothIAS=Yes
SetVisUpperAlt=No
VisUpperAltLimit=6000
MaxIce=3
MinIce=-1
WindSmoothingDelay=0
WindSmoothAirborneOnly=No
LimitWindVariance=No
VisSmoothingDelay=0
VisSmoothAirborneOnly=No
TrafficControlDirect=Yes
SuppressCloudTurbulence=No
SuppressWindTurbulence=No
SpoilerIncrement=512
ZapSound=firework
ShortAircraftNameOk=No
UseProfiles=Yes
TCASid=Flight
TCASrange=40
TrafficScanPerFrame=10
AxisCalibration=No
CentredDialogue=Yes
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
ClearWeatherDynamics=Yes
OwnWeatherChanges=No
FixWindows=No
FixControlAccel=Yes
WeatherReadInterval=4
MoveBGLvariables=Yes
TimeForSelect=4
WeatherReadsFast=No
MainMenu=&Modules
SubMenu=&FSUIPC ...
BrakeReleaseThreshold=75
DontResetAxes=No
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No

[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=0
RudderTrimControl=0
CowlFlaps1Control=0
CowlFlaps2Control=0
CowlFlaps3Control=0
CowlFlaps4Control=0
MaxSteerSpeed=60
Throttle1=-16125,-512,512,16125/40
Spoilers=-15738,15867/24
Throttle2=-16125,-512,512,16125/40
UseAxisControlsForNRZ=No

[Buttons]
ButtonRepeat=20,10

[Axes.Cessna Skyhawk 172SP]
0=BX,256,D,1,0,0,0
1=BY,256,D,2,0,0,0
2=BU,256,D,4,0,0,0
3=CR,256,D,3,0,0,0

[JoystickCalibration.Cessna Skyhawk 172SP]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=0
RudderTrimControl=0
CowlFlaps1Control=0
CowlFlaps2Control=0
CowlFlaps3Control=0
CowlFlaps4Control=0
MaxSteerSpeed=60
Throttle=-16384,16383/8
Rudder=-16318,-512,512,13610/8
UseAxisControlsForNRZ=No
Aileron=-16222,0,0,16383/8
Elevator=-16222,0,0,16128/8

[Axes.A320-211 AF]
0=AZ,256,D,23,0,0,0
1=BX,256,D,1,0,0,0
2=BY,256,D,2,0,0,0
3=BZ,256,D,22,0,0,0
4=BR,256,D,10,0,0,0
5=BU,256,D,9,0,0,0
6=CX,256,D,7,0,0,0
7=CY,256,D,8,0,0,0
8=CR,256,D,3,0,0,0

[JoystickCalibration.A320-211 AF]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=0
RudderTrimControl=0
CowlFlaps1Control=0
CowlFlaps2Control=0
CowlFlaps3Control=0
CowlFlaps4Control=0
MaxSteerSpeed=60
Rudder=-15222,-512,512,16190
Spoilers=-16124,16125/24
Throttle1=-16124,-15608,-15608,16125/40
Throttle2=-16124,-512,512,15996/40
Flaps=-15867,15995/24
LeftBrake=-16383,16383/56
RightBrake=-16383,16383/24
UseAxisControlsForNRZ=No
Aileron=-16383,-512,512,16160/8
Elevator=-16383,0,0,16189/8

[Buttons.A320-211 AF]
0=RB,21,C65966,0
1=UB,21,C65967,0
2=RB,22,C65971,0
3=UB,22,C65972,0

[Profile.Cessna Skyhawk 172SP]
1=Cessna Skyhawk 172SP
2=Cessna Skylane 182S Paint2

[Profile.A320-211 AF]
1=A320-211 AF
2=Project Opensky - Airbus A330-300RR Satcom VERSION 2
3=50N Boeing 737-300 Air New Zealand
4=Boeing 777-200ER General Electric 90-94B Project OSKY PIA BHX
5=Project Opensky -- Boeing 777-300 - Cathay Pacific B-HNF
6=Project Opensky Boeing 777-300ER General Electric 90-115B1 PH-BVB KLM
7=Boeing 777-300 Singapore AirLines

[Profile.MD11 three engines]
1=iFDG MD11 Lufthansa Cargo
2=L-1011-500 Pan Am
3=MD-11 Alitalia
4=iFDG British Airways
5=iFDG MD11 Swissair
6=iFDG MD11 McDonnell Douglas Federal Express(FedEx)
7=FSP Advanced Products MD-11 Overland Co.,Ltd "Simmer's Sky" NoVC
8=iFDG MD11 McDonnell Douglas United Parcel Service
9=iFDG MD11 Swissair Qualiflyer

[Axes.MD11 three engines]
0=AX,256,D,11,0,0,0
1=AZ,256,D,23,0,0,0
2=BX,256,D,1,0,0,0
3=BY,256,D,2,0,0,0
4=BZ,256,D,22,0,0,0
5=BR,256,D,10,0,0,0
6=BU,256,D,9,0,0,0
7=CX,256,D,7,0,0,0
8=CY,256,D,8,0,0,0
9=CR,256,D,3,0,0,0

[JoystickCalibration.MD11 three engines]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=0
RudderTrimControl=0
CowlFlaps1Control=0
CowlFlaps2Control=0
CowlFlaps3Control=0
CowlFlaps4Control=0
MaxSteerSpeed=60
Throttle1=-16125,-512,512,16125/40
Spoilers=-15738,15867/24
Throttle2=-16125,-512,512,16125/40
Throttle3=-16383,0,512,16125/40
Flaps=-16125,16124/24
Rudder=-16384,0,0,16190/8
LeftBrake=-16383,16252/24
RightBrake=-16384,16383/24
UseAxisControlsForNRZ=No
Aileron=-16254,0,0,16352/8
Elevator=-16383,0,0,16189/8

[Buttons.MD11 three engines]
0=RB,21,K113,8
2=RB,22,K113,8
4=RA,6,K113,8

[Profile.B747 four engine]
1=Project Opensky - Boeing 747-400 AIR FRANCE
2=Project Opensky - Boeing 747-400F UPS N540UP
3=Project Opensky - Boeing 747-400BCF UPS N548UP
4=Boeing 747-400 Air France GE
5=Boeing 747-400 British Airways Union Flag RR
6=Project Opensky - Boeing 747-400 KLM
7=Project Opensky - Airbus A340-313E1 SAS WV
8=Project Opensky - Airbus A340-313E1 SAS VC
9=B747-400 Air France
10=A380 Edelweiss

[Axes.B747 four engine]
0=AX,256,D,11,0,0,0
1=AY,256,D,12,0,0,0
2=AZ,256,D,23,0,0,0
3=BX,256,D,1,0,0,0
4=BY,256,D,2,0,0,0
5=BZ,256,D,22,0,0,0
6=BR,256,D,10,0,0,0
7=BU,256,D,9,0,0,0
8=CX,256,D,7,0,0,0
9=CY,256,D,8,0,0,0
10=CR,1,D,3,0,0,0

[JoystickCalibration.B747 four engine]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=0
RudderTrimControl=0
CowlFlaps1Control=0
CowlFlaps2Control=0
CowlFlaps3Control=0
CowlFlaps4Control=0
MaxSteerSpeed=60
Throttle1=-15866,-15866,-15866,15996/40
Spoilers=-15867,16124/24
Throttle2=-16124,-512,512,16125/40
Throttle3=65,516,516,16125/40
Throttle4=258,516,516,16061/40
Flaps=-15867,16125/24
Rudder=-16190,-512,512,16319/8
LeftBrake=-16384,16383/24
RightBrake=-16384,16383/24
UseAxisControlsForNRZ=No
Aileron=-16383,0,0,16383/8
Elevator=-16192,0,0,16189/8

[Buttons.B747 four engine]
0=RB,21,K113,8
!1=
10=RB,22,K113,8
11=RA,6,K113,8
12=RA,7,K113,8
13=UA,6,K112,8
15=UB,21,K112,8
16=UA,7,K112,8
17=UB,22,K112,8

[Axes]
0=BU,256,F,65820,0,0,0

[Profile.Feelthere A320]
1=Feelthere A320 CFM Airbus House
2=Feelthere A330-200 MRTT Airbus
3=Feelthere A318 CFM Airbus House

[Axes.Feelthere A320]
0=AZ,256,D,23,0,0,0
1=BX,256,D,1,0,0,0
2=BY,256,D,2,0,0,0
3=BZ,256,D,22,0,0,0
4=BR,256,D,10,0,0,0
5=BU,256,D,9,0,0,0
6=BU,U,-4515,-1032,65602,0
7=CX,256,D,7,0,0,0
8=CY,256,D,8,0,0,0
9=CR,256,D,3,0,0,0

[JoystickCalibration.Feelthere A320]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=No
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=Yes
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=0
RudderTrimControl=0
CowlFlaps1Control=0
CowlFlaps2Control=0
CowlFlaps3Control=0
CowlFlaps4Control=0
MaxSteerSpeed=60
Spoilers=-16124,15867/24
Aileron=-16380,-512,512,16380
Elevator=-16319,0,0,16254/8
SlopeElevator=10
Throttle1=-16383,-512,512,16383/40
Flaps=-15996,15608/24
Rudder=-15028,-512,512,13043/8
LeftBrake=-16383,16383/24
RightBrake=-16383,16383/24
Throttle2=-16383,-512,512,16383/40
MapThr12to34=Yes
SlopeThrottle1=-15
SlopeThrottle2=-15

[Buttons.Feelthere A320]
0=RB,21,K113,8
1=UB,21,K112,8
2=RB,22,K113,8
3=UB,22,K112,8

juanvm · #4 27th March 2010, 18:22

http://www.saitekforum.com/attachmen...d=126971379 1

http://www.saitekforum.com/attachmen...d=126971393 0

http://www.saitekforum.com/attachmen...d=126971393 0

http://www.saitekforum.com/attachmen...d=126971393 0

TC-BUG · #5 28th March 2010, 20:34

Unfortunately it is not working.Thank you for trying though.

juanvm · #6 29th March 2010, 14:48

Quote:

Originally Posted by TC-BUG

Unfortunately it is not working.Thank you for trying though.

You should read the fsuipc documentation, the axis assignments section, a line was added to one the config files
and I do not remember which it was, it really took me a long time to make it work correctly even with the help of Pete I remember the last thing I did was the slope setting, that finally worked. You should visit Pete forum and do a search for Wilco Feelthere. If I find the additional changes I let you know. (I have to document then just in case)

TC-BUG · #7 19th April 2010, 11:25

All I had to do was select the "Exclude THROTTLEn SET" option from Page 3 of Joystick Calibration tab and VOILA ! Problem no more

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode