jimbow412
19th June 2007, 23:11
I sent the following to tech support:
I have had my New X52 for a week plus and can not get it to work wright--have read alol of the posts and found others who have similar problems.
Problem with stick:
Lockon 1.12a apparently reads randomly functions "buttons #33 & #34" (used by the small wheel on the throttle arm) as they would have been activated. But this happen without touching the wheel at all ?!?
For example, if you try to change some X-52 buttons assignment in Lockon setup, it will read #32, #33 or #34 as soon as the small assigment window open and before you have the time to press on the button you want.
Thanks for any help
I saw some post abut looking for certain S/N--mine isSZ00411681
SYSTEM INFO:
SYSTEM INFO:
AMD 3800 X2 Dual core processor
1 gb pc6400 DDR2 memory
256mb 7300GT Nvidia 3-D video card
DVD/CD Rewritable Drive
160gb HardDrive
Xion Super Cooling case with 430 Watt Power supply
Windows XP Home
AVG Anti-virus
AVG Anti Spyware
22” ACER LCD Monitor
CA 2.1 Channel Speaker System
Here was reply and results:
Hi,
first go to the test screen (Start > Control Panel > Game Controllers > Properties) and check that everything responds ok there.
Next, as a test, go to the device manager (Right Click > My Computer > Properties > Hardware Tab > Device Manager) and expand 'saitek magic bus' if it is present and right click 'saitek magic mouse' and go to properties and disable it. Then try Lock-On.
Next try installing the driver from the following link:
X52 drivers
And see if that makes a difference.
MY REPLY:It tested ok
After step 2 --still no luck
I dwn loaded update and ran it
Now cannot find icon that was at bottom of page--
I went to control panel and it tested ok after the update
still can't get to work
Should I remove complete program and load from CD?
Thanks for any help as I'm not all that PC savey!
I have had my New X52 for a week plus and can not get it to work wright--have read alol of the posts and found others who have similar problems.
Problem with stick:
Lockon 1.12a apparently reads randomly functions "buttons #33 & #34" (used by the small wheel on the throttle arm) as they would have been activated. But this happen without touching the wheel at all ?!?
For example, if you try to change some X-52 buttons assignment in Lockon setup, it will read #32, #33 or #34 as soon as the small assigment window open and before you have the time to press on the button you want.
Thanks for any help
I saw some post abut looking for certain S/N--mine isSZ00411681
SYSTEM INFO:
SYSTEM INFO:
AMD 3800 X2 Dual core processor
1 gb pc6400 DDR2 memory
256mb 7300GT Nvidia 3-D video card
DVD/CD Rewritable Drive
160gb HardDrive
Xion Super Cooling case with 430 Watt Power supply
Windows XP Home
AVG Anti-virus
AVG Anti Spyware
22” ACER LCD Monitor
CA 2.1 Channel Speaker System
Here was reply and results:
Hi,
first go to the test screen (Start > Control Panel > Game Controllers > Properties) and check that everything responds ok there.
Next, as a test, go to the device manager (Right Click > My Computer > Properties > Hardware Tab > Device Manager) and expand 'saitek magic bus' if it is present and right click 'saitek magic mouse' and go to properties and disable it. Then try Lock-On.
Next try installing the driver from the following link:
X52 drivers
And see if that makes a difference.
MY REPLY:It tested ok
After step 2 --still no luck
I dwn loaded update and ran it
Now cannot find icon that was at bottom of page--
I went to control panel and it tested ok after the update
still can't get to work
Should I remove complete program and load from CD?
Thanks for any help as I'm not all that PC savey!